Fire protection adhesive

Pulit BSK Fire protection adhesive is a non-flammable, solvent-free, self-curing waterglass adhesive, which is characterized by its longterm and high strength.

Since the adhesive has a purely inorganic structure, it does not release toxic or flammable gases under fire load.

Pulit BSK fire protection adhesive
Pulit BSK fire protection adhesive


Pulit BSK Fire protection adhesive is used in preventive structural fire protection to seal and join fire protection panels according to DIN 4102.

Product data

ColourDensitySolid contentpH- value
beigeapprox.1,7 g/cm3approx.65 %approx.42 Pa·sapprox.11
* Brookfield Viscosimeter, internal measurement during the production


Glue or cling the surface after applying the adhesive. The glue application should be done directly from the tube to the glue site. Remove excess adhesive with a spatula, do not spread, especially if a subsequent coat is to be applied. The room and substrate temperature must not be less than approx. 5° C during processing. Tools, workwear and contacted skin parts can be easily cleaned with water before setting.


  • Simple application
  • Ready to use
  • Uniform consistency
  • High yield
  • Rapid hardening
  • High adhesive strength


Store at normal room temperature 5-25°C. Immediately close the tubes and containers after us. Store the mateial in a frost-free environment. In tubes, Pulit BSK fire protection adhesive is stabe for approx. 6 months, and in closed containers for 12 months.

Delivery container and packaging

Tubes of 1.0 kg (in 20 or 40 kg pails), 15 kg or 25 kg buckets.